Inland Cash Register

Since 1942 - Sharp - POS - And More!

Uniwell SX-7005 Errors

RECPT Paper Out (104)

    Error Messege

    RECPT Paper Out  (104)

    CAUSE OF ERROR

    The Receipt side of the Printer has run out of paper and needs be refilled.

    RESOLUTION

    Feed paper though the Receipt (Left hand side) useing the steps below.

    DO NOT force paper through the printer as this may result in damage to the printer mechanism or cause a paper jam.

    1. Removing the printer cover: Turn the printer cover lock key counter-clockwise and gently lift the cover.

    2. Removing the old paper:
      Press the “Receipt feed”  key to feed the remaining paper through the printer. 
      OR
      Pull the paper release lever (head up lever) towards the front of ECR and pull the paper through the printer
      paper-head
    3. Inserting new paper:
      a)   Place the new paper in the correct position on the printer's paper roll bed.
      b)   Make sure that the leading edge of the new paper roll is cut straight across.
      c)   Set the head up lever to the head down condition and insert the leading edge into the printer slot, the paper is automatically fed into the printer.
      paper-feed

    If receipts are blank, it is likely the paper is inserted the wrong way. Thermal paper will only print on one side.

    Did this fix the problem?

    If not, Then please call (909) 884-0475

    You are here: Home Support Uniwell SX-7005 Errors RECPT Paper Out (104)