Skip to content
Exterior view of a SKAN stainless steel pharmaceutical isolator featuring multiple glass viewing panels and integrated white protective sleeves with blue seals for sterile material handling.

What Annex 1 means for your isolator design

Annex 1 reshaped expectations for the whole production line. Here’s where isolator design is affected most.

Learn more

Annex 1 didn’t just update guidance, it reshaped what’s expected of production lines, including the barrier technology used, at every stage: how contamination is prevented, how human interaction is controlled, and how state of control is demonstrated. In practice, that means designing the isolator together with the processes and procedures around it.
Barrier technology—isolators and Restricted Access Barrier Systems (RABS)—is central to that shift: Annex 1 mandates justification for any approach that doesn’t use it.

To help you navigate the not-always-straightforward decisions this raises, this overview focuses on the functional areas where Annex 1 has most strongly reshaped how isolators and the lines around them are designed and operated.

Annex 1 influence on isolator design

Physical interfaces

  • Transfer systems

    EU GMP Annex 1 identifies transferring materials, liquids, and packaging into and out of an isolator as one of the greatest potential sources of contamination in the whole production process. SKAN’s expertise covers all areas of transfer in production lines and includes them in a holistic line concept.

    → Read more about transfer systems

  • Glove management

    Gloves are the only physical barrier between operators and the sterile environment inside an isolator, with a tear, pinhole, or poor reseal after an intervention compromising the whole system. That’s why Annex 1 requires regular integrity testing and monitoring. SKAN integrates glove testing and monitoring suited to each isolator’s configuration.

Wireless glove tester for fast glove testing.
Annex 1 influence on isolator design

Materials and cleaning

  • Material resistance

    When it comes to containment, there’s rarely a single “best” material. Annex 1 requires materials to withstand repeated cycles of cleaning and disinfection without shedding particles. At the same time, materials must not damage what they contact: in filling lines, the mechanisms that move glass containers are often built in polymer, since steel would scratch the glass. To help customers balance these needs, SKAN independently tests how materials—both theirs and partners’—hold up under real conditions.

    → Read more about material compatibility tests

  • Cleaning

    “Visibly clean” isn’t accepted as proof. Contamination visibility varies by drug substance, so cleaning must be validated beyond what the eye can see. Annex 1 expects a process built around where contamination occurs on your specific line, not a one-size-fits-all pattern. That’s why SKAN tests how cleaning agents interact with specific materials in-house, rather than relying on general compatibility claims.

    → Read more about cleaning strategies

Materialeignungstest wasserabweisende Oberfläche
Annex 1 influence on isolator design

Decontamination and verification

  • Decontamination

    Once a surface is clean, it isn’t yet sterile. Annex 1 requires an automated, validated decontamination step—typically using vaporized hydrogen peroxide. Getting the agent to reach every surface evenly is harder than it sounds: humidity, surface temperature, and airflow all affect distribution, which is why SKAN validates each isolator’s cycle individually.

    → Learn more about decontamination technology

  • Biological indicators

    Decontamination must be proven, not assumed. Biological indicators (BIs)—hardy bacterial spores placed inside the isolator before the cycle—confirm every corner was actually reached. But indicators aren’t as reliable as their labels suggest: BI quality and therefore reliability can vary dramatically . That’s why SKAN produces its own BIs, giving customers indicators whose quality is verified and well-established in the field.

    → Learn more about SKAN BIs

Annex 1 influence on isolator design

Sterility assurance

  • First air protection, verified by simulation

    “First air” is the air that reaches your product before touching anything else. Annex 1 requires unidirectional airflow that sweeps this air directly over exposed product in the critical zone, undisturbed. SKAN uses airflow simulation to catch turbulence or dead zones before an isolator is even built.

    → Read more about CFD simulations

  • Environmental monitoring

    Annex 1 requires continuous monitoring of air and surfaces, but allows flexibility in how: settle plates, rapid methods, or a mix, chosen case by case based on risk. Matching the right approach to your specific process is the hard part, which is why SKAN integrates the environmental monitoring method that fits your requirements, rather than locking you into one.

    → Whitepaper: “Environmental Monitoring in Aseptic Manufacturing”

CFD Flow Simulaton

Want to go deeper on any of these?

Reach out to our experts to discuss your requirements.

Back to top