Skip to content
Safety cabinet for working in microbiological fields

SN EN 12469: What it means for biological safety cabinets

Greater ergonomics, greater practicality, greater safety and clear lines of responsibility

Learn more

How will the new requirements be implemented? And what does the new standard mean for existing equipment in the laboratory?

After around 25 years, the European standard for biological safety cabinets has been thoroughly revised. The new SN EN 12469 takes account of the current state of the art and places stronger focus on safety in real-world laboratory operations, ergonomic working practices and clearly defined test procedures. This results in significant changes for manufacturers, designers, operators and users.

Overview

One standard, five parts – one common goal

  • Part 1

    Classes and basic requirements

  • Part 2

    Class II biological safety cabinets

  • Part 3

    Class III enclosed biological safety cabinets

  • Part 4

    Class I biological safety cabinets with recirculating air filtration

  • Part 5

    Installation, commissioning and routine testing

Biological safety cabinets (BSCs) are key protective devices in laboratories where work is carried out with hazardous biological substances. Depending on the cabinet class, they protect staff, the product and the environment from contamination and the spread of biological substances.

The previous standard, EN 12469, dated from the year 2000. A revision was necessary to better reflect new technical findings, increased occupational safety requirements and the practical needs of modern laboratory environments.

Parts 1, 2 and 5 have already been published.

Internal expertise

SKAN provides expertise to international standardisation work

The revision of a technical standard is an international process that requires the harmonisation of differing requirements, experiences and specialist knowledge. SKAN also plays an active role in this work.

SKAN is represented on the international standards committees by Matthias Bittner. In addition, Matthias Bittner has set up a national working group comprising biosafety experts to bring the Swiss perspective to bear on the standardisation process.

This involvement complements SKAN’s long-standing in-house expertise in the field of biological safety cabinets and biosafety. The knowledge gained from technical development, practical application and the testing of protective functions enables normative requirements to be considered not in isolation, but in the context of actual laboratory conditions.

Air flows

What matters is the proven protective effect

One of the most significant changes concerns the assessment of airflows within biological safety cabinets.

Previously, the standard specified fixed values for the displacement flow in the working area (downflow) and the air inlet velocity at the working opening (inflow). The new standard, however, adopts a performance-based approach: manufacturers may define the operating parameters appropriate for their specific model. As part of the type testing, they must demonstrate that the required protective functions are reliably fulfilled at these settings.

The tested operating parameters and the associated measurement points are documented and indicated on the unit. A denser measurement grid also enables a more precise verification of airflows during subsequent inspections and maintenance work.

This shifts the focus from compliance with rigid air velocities to the experimental demonstration of the protective effect. It is not the highest possible air velocities that are decisive, but the interaction between inflow and downflow. The air barrier must be stable and ensure both personal protection and product protection, as well as protection against carry-over.

airflow scheme for a safety cabinet with 2 hepa filters
Points of provocation

Safety under realistic conditions

A key innovation is the so-called ‘provocation points’. These extend the testing of the safety functions beyond the ideal operating point.

In everyday laboratory work, various factors can influence airflows. These include the movement of people, room ventilation, neighbouring equipment or changes in filter and fan performance. Such influences can compromise the protective effect of a safety cabinet, even if it functions flawlessly under ideal conditions.

During type testing, therefore, specific deviations in airflows are simulated. For Class II biological safety cabinets, the new standard requires additional microbiological testing under defined deviations from the operating point.

The aim is to ensure that the protective functions are not only demonstrated under optimal conditions, but also remain reliable in the event of defined malfunctions. This allows for a better assessment of the equipment’s robustness under real-world conditions. The visualisation of airflows is also becoming increasingly important. More precise flow tests with defined test points help to identify potential weak points.

Working conditions

Ergonomics and hygiene

In addition to the technical protective effects, the revised standard places greater emphasis on the working conditions of laboratory staff. Among other things, the requirements for legroom during seated work have been newly introduced or defined more precisely. This is particularly relevant for models with additional HEPA filter stages located beneath the worktop.

Greater focus is also placed on the cleanability of the interior. Corners, edges and joints must be designed in such a way as to allow for reliable cleaning.

These aspects demonstrate that the safety of a biological safety cabinet does not depend solely on filter technology and airflows. Ergonomic design and hygienic maintenance are also key components of safe laboratory operations.

PPE cleaning in a safety cabinet.
Types of examination

Installation, maintenance and routine inspections

  • Type testing

    Comprehensive testing of a model by the manufacturer; includes extensive microbiological testing of the protective functions and physical testing

  • Unit testing

    Factory testing of each individual unit by the manufacturer; ensures that the unit conforms to the type-approved model

  • Commissioning

    Testing at the installation site following installation to check that everything is working correctly (including air flow)

  • Routine inspection

    Regular checks whilst the system is in operation to ensure it is functioning correctly (similar to commissioning)

The new standard provides greater clarity on which tests are to be carried out and who is responsible for them. It distinguishes between type testing, factory testing, commissioning testing and regular routine testing.

Particular importance is attached to the installation of the safety cabinet. The location and any potential disruptive factors must be assessed and documented. These include, for example, distances from walls and doors, access routes, and the effects of room ventilation or neighbouring equipment. These conditions must also be taken into account during ongoing operation. Routine inspections must be carried out at least once a year by qualified specialist personnel. This involves not only checking technical parameters, but also assessing the environmental conditions and documenting the results.

For operators, this means that selecting a suitable unit is only one part of the safety concept. Equally important are professional installation, qualified servicing and trained users.

Existing facilities

What does the new standard mean for existing installations?

The publication of a revised standard does not automatically mean that all existing safety fume cupboards must be replaced immediately. However, the basis on which the safety and suitability of a piece of equipment are assessed does change.

Operators should carry out a risk assessment to check whether their existing equipment continues to meet the requirements of its intended use. Age, technical condition, previous test results and the specific working conditions play an important role in this regard.

When making new purchases, it is advisable to specifically enquire about equipment whose compliance with the current standard has been verified by appropriate tests. A distinction must be made between a design ‘in accordance with the standard’ and a version that has actually been tested or certified in accordance with the standard.

Hand with blue glove touching the panel of the safety cabinet
Conclusion

Combining regulatory expertise and practical experience

The revision of SN EN 12469 highlights the importance of the interplay between technical development, proven protective performance and competent operation. Modern biological safety cabinets must not only meet defined requirements, but also reliably ensure their protective functions under the intended operating conditions.

SKAN combines active participation in international standards bodies with in-depth in-house expertise. In this way, we contribute technical knowledge and practical experience to the discussion of current requirements for biological safety cabinets.

SKAN technican at customers site shaking hands

Technical articles and sources

  • SKAN AG: “SN EN 12469-2025: An update on the new standard for biological safety cabinets”. Internal technical article on the revision of the standard, the technical innovations and the implications for operators and users, by Matthias Bittner
  • Laborpraxis / Berner International GmbH:

    Lübke, Moritz; Gragert, Sven; Hinrichs, Thomas: ‘New gold standard for safe working: DIN EN 12469’. Guest article dated 9 August 2026.

  • Berner International GmbH: Technical article on the revised DIN EN 12469 and the requirements for Class II biological safety cabinets, published as a guest article in Laborpraxis

Would you like to discuss the changes with our experts?

We are happy to assist you.

Back to top