Inland Cash Register

Since 1942 - Sharp - POS - And More!

Uniwell SX-7005 Errors

Initial Reset - Register Lock up/ Frozen Screen

    Error

    The Registers has become locked or frozen and has stopped responding

    CAUSE OF ERROR

    When a printer jam has occurred, it will lock to the register to make sure damage is not done to the printer. Also a power surge may cause this issue.

    RESOLUTION

    INITIAL RESET SX 7005 – Reset Printer
    If you become stuck in a transaction and the cash register does not respond when pressing either the clear or cashier keys or the printer has quit functioning, then follow these steps to “re-initialize.”

    Initial Reset

    1. Turn cash register power switch off. (Power switch is located on right side of the cash register, near the back.
      power-switch
    2. Turn the control key to SP position.
      sp-mode
    3. Press and hold the three “IR” keys at the same time, as shown below
      .uniwell-initial-reset
    4. While still holding down the three “IR” keys, Turn the cash register power switch on.
      power-switch
    5. If done correctly, the "IR Done" message is display. The three “IR” keys can be released
      ir-done
    6. Turn the key to the "R" Mode and sign on a cleark

     

    Did this fix the problem?

    If not, Then please call (909) 884-0475

    You are here: Home Support Uniwell SX-7005 Errors Initial Reset - Register Lock up/ Frozen Screen